Description
API Freshwater Master Liquid Test Kit will help you understand the importance of water quality. By having the correct parameters and good water quality, it will help your fish and plants live longer and healthier lives.
It is recommended to test every 2-3 days in new aquariums and once a week in established aquariums.
Permanent Hardness (pH):
- The pH describes one of the most important chemical properties of your water, the balance between acids and bases.
- All fish, plants, and micro-organisms react very sensitively to drastic and rapid changes to the pH value.
- A pH value of between 6.5 and 8.5 is ideal for nearly all freshwater fish. This can be adjusted using either API pH UP or API pH DOWN.
Ammonia (NH₃/NH₄⁺):
- In aquarium water, ammonium (NH4⁺) is produced by the bacterial decomposition of uneaten food and plant matter as well as fish waste.
- Although ammonium is an important nutrient for plants, this is dependent on the pH level.
- If the pH level is above 7, it can convert to ammonia (NH3) which is then toxic for the fish.
- Above pH 7 even in small amounts of 0.25ppm, ammonia will still pose a threat to the fish with symptoms like rapid gill movements, nervous swimming, and loss of appetite.
- In higher concentrations from 1.0ppm and above, it can be lethal.
- If a high level of ammonia is detected, a partial water change must be first carried out. API Aqua Essential or API Ammo-Lock should also be used at this time.
- Testing the presence of ammonia/ammonium (NH3/NH4 +) in total, along with nitrite provides important information about the aquarium water quality.
Nitrite (NO₂):
- The nitrite level should be as low as possible, less than 0.25ppm is ok, higher than 0.25ppm is harmful.
- If the nitrite level is too high, carry out partial water changes (30% each) until the nitrite content is no more than 0.25ppm. To help this, remove any debris such as fish food or plant remains, and add some API Aqua Essential and API Quick Start.
Nitrate (NO₃):
- As part of the nitrogen cycle in your aquarium or garden pond, organic material that contains nitrogen such as fish excrements and uneaten food degrades and causes nitrite (NO₂) and finally nitrate (NO₃) to accumulate in the water.
- Nitrate in concentrations greater than 50 mg/l in aquaria and greater than 10 mg/l in garden ponds promote strong algae growth.
- If the nitrate concentration is too high, a partial water exchange should be carried out. In addition, good plant growth helps to reduce excess nitrate.
- Additional nitrate reduction in the aquarium can be achieved with API Aqua Essential.
- Always prepare the water with API Aqua Essential before or after you add new water to the aquarium or pond.
Suitable for use in:
- Tropical aquariums.
- Cold water aquariums.
- Ponds.
For more information click here: API® | FRESHWATER MASTER TEST KIT








