Dennerle Water Test 6in1

£12.29

Dennerle Water Test 6in1 instantly measures 6 of the most important water values in the aquarium.

These strips check Permanent Hardness (pH), Carbonate Hardness (kH), General Hardness (gH), Nitrite (NO₂), Nitrate (NO₃), and Chlorine (Cl₂) with results in 60 seconds.

Contains 50 test strips.

In stock

- +

Description

Dip – read – done! It is so easy to test your water using Dennerle Water Test 6in1.

Dennerle Water Test 6in1 will help you understand the importance of water quality. By having the correct parameters and good water quality, it will help your fish and plants live longer and healthier lives.

How to use:

  • Read enclosed instructions for use.
  • Move test strip 2-3 times in the water.
  • Shake the strip to remove the excess water.
  • Immediately compare chlorine test field with scale.
  • Wait approx. 60 seconds.
  • IMPORTANT NOTE: Do not touch the test fields or hold them under running water.
  • Place the test strip in the correct position against the colour chart on the side of the container. Take the reading by comparing the colours obtained with the colour chart.
  • Check the meaning of the readings in the table included and read the advice on corrective actions to take.

It is recommended to test every 2-3 days in new aquariums and once a week in established aquariums.

Permanent Hardness (pH):

  • The pH describes one of the most important chemical properties of your water, the balance between acids and bases.
  • All fish, plants, and micro-organisms react very sensitively to drastic and rapid changes to the pH value.
  • A pH value of between 6.5 and 8.5 is ideal for nearly all freshwater fish.

Carbonate Hardness (kH):

  • Important in the stabilisation of the pH value. Ideally, your aquarium should be between 3-10 °dKH.
  • kH represents the hydrogen carbonate concentration, which acts as a pH-buffer.
  • A stable buffer capacity will be achieved by kH values higher than 6 °dKH.

General Hardness (gH):

  • The general hardness (gH) is determined by the concentration of various ions in the water, such as calcium and magnesium.
  • It has a direct influence on the vital functions of fish, plants, and micro-organisms.
  • The general hardness value for most ornamental fish is between 6 and 16°dH.

Nitrite (NO₂):

  • The nitrite level should be as low as possible, less than 0.3mg/l is ok, higher than 0.3mg/l is harmful.
  • If the nitrite level is too high, carry out partial water changes (30% each) until the nitrite content is no more than 0.3mg/l. To help this, remove any debris such as fish food or plant remains, and add some Dennerle Bacto Elixier FB7.

Nitrate (NO₃):

  • As part of the nitrogen cycle in your aquarium or garden pond, organic material that contains nitrogen such as fish excrements and uneaten food degrades and causes nitrite (NO₂) and finally nitrate (NO₃) to accumulate in the water.
  • Nitrate in concentrations greater than 50 mg/l in aquaria and greater than 10 mg/l in garden ponds promote strong algae growth.
  • If the nitrate concentration is too high, a partial water exchange should be carried out. In addition, good plant growth helps to reduce excess nitrate.
  • Always prepare the water with Dennerle Aqua Elixier before or after you add new water to the aquarium.

Chlorine (Cl₂):

  • Chlorine is harmful to fish and plants. Just like the nitrite, chlorine should therefore not be detectable in the aquarium water.
  • Always prepare the water with Dennerle Aqua Elixier before or after you add new water to the aquarium.

Suitable for use in:

  • Tropical aquariums.
  • Cold water aquariums.
  • Ponds.

Not suitable for use in marine aquariums.

Reviews

There are no reviews yet.

Be the first to review “Dennerle Water Test 6in1”

Your email address will not be published. Required fields are marked *